Concrete steps & stoops in Roanoke, VA
Steps that don't crack, heave, or trip anybody.
Entry steps and stoops look simple until you're the one standing on a set that's shifted, cracked, or built at the wrong rise. We pour them with a real footing and a rise-and-run that matches code, every time.
What goes into a set of steps
Steps get treated like an afterthought on a lot of jobs. They're actually one of the more exacting pours we do — the margin for error on rise, run, and drainage is small, and mistakes show up fast.
Entry steps
Front and back entry steps poured to tie into the house and hold their footing through freeze-thaw seasons.
- Footing dug below frost depth
- Rebar-reinforced risers and treads
- Rise and run kept consistent step to step
- Broom finish for grip in wet weather
How we pour a set of steps
Steps take more time per square foot than a flat slab. There's more forming, more finish work on each riser, and no room to eyeball the rise. Here's what a job actually looks like.
- 01
Measure the rise
We measure the total rise from the ground to the door and divide it evenly across the number of steps. Uneven risers are the most common complaint we see on other people's work — one step even a half-inch off throws people off.
- 02
Dig the footing
Steps carry weight and take a beating from freeze-thaw. We dig the footing below frost depth so the whole structure doesn't heave in the winter — a shallow footing is where most cracked or shifted steps start.
- 03
Form and reinforce
We form each riser and tread and set rebar through the structure so it moves as one piece instead of cracking apart at the joints.
- 04
Pour and finish
Concrete goes in, gets worked into the corners of the forms, and finished with a broom texture on the treads for traction — smooth treads look nice for about one rainstorm.
- 05
Cure before use
We tell you how long to stay off the steps before regular use. Walking on them too soon is how edges chip and finishes scuff before the concrete has any strength.
Questions before you hire someone for steps
How deep does the footing need to be?
Deep enough to get below frost depth for our area. A shallow footing is the number one reason steps crack, tilt, or separate from the house after a hard winter — ask whoever quotes you how deep they're digging.
Why do my old steps have uneven risers?
Usually because whoever poured them didn't measure the total rise first and divide it evenly, or the footing settled unevenly over time. We measure the full rise before we form the first step.
Can you match my existing porch or stoop height?
Yes. We check the threshold height and the existing structure before we pour so the new steps sit right against the house instead of leaving a gap or a lip.
Do you install the handrail too?
We pour the pad or footing sized for the railing so it's ready to anchor. Let us know your railing plans before pour day so we can set the footings in the right spot.
How long before I can use new steps?
We'll give you a timeline for your specific job. Using them too early is how you end up with chipped edges and a rough-looking finish before the concrete's had a chance to cure.
Do you serve areas outside Roanoke?
Yes — we take on step and stoop jobs in Roanoke County, Salem, Botetourt County, Smith Mountain Lake, Rocky Mount, Franklin County, Bedford, Craig County, and Montgomery County. Call or text with your address.
Ready to get your steps poured right?
Tell us about your entry steps or stoop — current condition, rough size, and what's not working about it now. We'll get back to you fast.
Call (540) 384-9297